Art & Craft ISOMIX Moulding Plaster 4kg - Mercola

ISOMIX ART & CRAFT is a controlled setting casting and molding plaster. It is based on a special gypsum quality with special additives that offer excellent workability, adhesion, strength and plasticity. It is easily mixed with water forming a creamy mixture with homogeneous characteristics. It is suitable for the production of a variety of ornamental plaster moldings, cornices and various artifacts. It allows the reproduction of slight details. Its strength and controlled setting time makes it suitable also for the production of molds.

ADVANTAGES

• Excellent surface adhesion properties
• Extra strong
• Easy to use - just added to water
• Homogenous paste texture
• Controlled setting
• Easily sanded
• Very low shrinkage
• Can easily be painted
• High plasticity

APPLICATIONS

• Construction of plaster ornamental objects
• Construction of cast made products
• Construction of hand-made artifacts
• Construction of molds

SPECIFICATIONS

• Coverage: depends on application
• Thinning: 2kg of drymix with 1kg water
• Application: by knife
• Touch dry: 15 - 20 minutes 20oC
• Hard dry: 40 - 45 minutes 20oC
• Interior use
• Application temperature: 10oC - 35oC
• Cleaning: with water

SURFACE PREPARATION

1. Clean thoroughly the mold or the surfaces on which ISOMIX ART & CRAFT plaster will be applied.
2. If plaster is going to be applied on a surface, make sure that the surface is firm and can withstand loads.
3. Moisten the application surface.

MIXING INSTRUCTIONS

For the preparation of the mixture of the molding and casting plaster ISOMIX ART & CRAFT, empty approximately 2 parts of plaster into 1 part of clean water, pouring the plaster powder slowly. Then stir carefully, until the mixture is homogenized and lump free. Never pour the water in the plaster powder, always pour the powder in the water.

APPLICATION

1. Finished plaster can be casted in molds for approximately 4 to 15 minutes after mixing.
2. For spatula or trowel applications, workability is 10 - 30 minutes after mixing.
3. After it is completely dry, the plaster can be painted.

USEFUL INFORMATION

• The final whiteness of ISOMIX ART & CRAFT casting and molding plaster is achieved when the product is completely dry.
• New objects should not be subject to strain for at least 24 hours.
• Consumption depends on each specific application.

Packaging: 4kg

Reference Code: 07019