Finish Glass 2 Components A&B 750ml - La Pajarita

Description

Finish Glass is a colorless and transparent varnish with two components (Component A and Component B) that allows us to achieve crystalline finishes of high hardness and gloss.

Due to its careful formulation, it is a product that, even with a high viscosity, creates perfectly level surfaces free of bubbles with a 3D effect.

It can be applied on a multitude of surfaces: wood, paper, cardboard, metal, plaster, ceramic, stone and any painted surface, providing durable and resistant surfaces, capable of withstanding humidity, cleaning stains ..., making it ideal to be able to varnish furniture such as tables and bar counters.

In addition, it does not yellow and offers a resistant finish, but at the same time flexible that does not break on impacts.

Uses

1. Crafts with Epoxy Resin on jewelery
2. Epoxy resin on wood
3. Dyeing of Epoxy Resin
4. Tables with Epoxy Resin
5. Bar varnish or high-use element

Application Tips

1. It is very important that both components are perfectly mixed, otherwise the product will not harden properly and may be sticky or with imperfections on its surface.

2. To improve results, it is convenient that the containers containing Finish Glass are stored at a temperature of 20-23º C before use.

3. When the room where we are working or the containers containing Finish Glass are subjected to low temperatures, the viscosity of the mixture becomes higher and, therefore, more bubbles are formed during stirring and more difficult to release them. For this reason, it is possible to add from 5 to 15%, depending on the temperature, of "Solvent Finish Glass La Pajarita", which will facilitate the stirring of the mixture and later, the leveling and elimination of bubbles during drying. The greater the amount of solvent incorporated, the longer the drying time will also be.

4. The surface must be dry and free of dust, grease, wax ...

5. The surface to be applied must be level.

6. For a good leveling and for a perfect job it is important that we drop enough material to flood the entire surface.

7. Mix only the Finish Glass that is going to be used at the moment, since this mixture will begin to thicken and later harden in about 25 minutes.

8. Make sure fluid is well distributed without leaving dry gaps.

9. It is convenient to protect the varnished object during its drying, to avoid that the dust is deposited.

10. Excess quantity of Finish Glass can cause dripping problems on the sides of the pieces to be applied, to avoid this they can be protected with masking tape or acetate paper. With the latter we can also create shapes that serve as a mold on which we will drop Finish Glass and once dry, we will remove the acetate without any problem.

11. One coat is sufficient, but if you wish to apply more than one coat, it is sufficient to clean the surface with alcohol.

12. Open pore woods, such as oak or walnut, will require a first coat to seal this pore to prevent bubbles from forming from the wood. To do this, prepare half of the mixture that would be used to varnish the surface and spread it with a brush or trowel. Let dry at least 5 hours and reapply the final coat.

13. On fabric or paper, it is advisable to seal before applying Finish Glass, with “La Pajarita Finish Varnish”.

14. You can use Finish Glass by brush as it comes or by reducing it with “La Pajarita Finish Glass Solvent” from 5 to 10%. You can freely broach on any type of painted surface such as stains, patina, glitter without fear of bleeding, without removing the previous paint.

15. Finish Glass can be used as an adhesive with a total drying time of 8 hours.

16. If scratches are made on a surface varnished with Finish Glass, polish the affected area and if they still cannot be removed, clean the surface with acetone and pour a thin layer again to renew the surface.

17. If an object is left for a long period of time on a surface varnished with Finish Glass, impressions or marks may remain, but these can disappear in a few hours at temperatures of 21-23º C due to its high flexibility. The higher the ambient temperature, the greater the ability to both create and remove these marks.

18. Finish Glass resists heat, water and alcohol, however, it is not convenient to apply a heat source directly.

19. It is not recommended for exterior use.

Reference Code: 712175