![Liquid Glass (2 components) 10kg - Emerald Liquid Glass (2 components) 10kg - Emerald](https://www.antoniadis.com.cy/29702-large_default/liquid-glass-2-components-10kg-emerald.jpg)
Liquid Glass (2 components) 10kg - Emerald
PAI66610
New product
Mixing ratio:
Component A: Component B = 100: 42 (by weight)
Description
EMERALD LIQUID GLASS is a transparent epoxy liquid glass resin, two components for professional use, ideal for the manufacture of decorative applications such as molding materials (wood, metal, stone, ceramics, porcelain, etc.), construction of special decorative applications with embossed objects without shrinking, forming a final surface like glass. It is clear /transparent, has excellent adhesion and bonding strength, excellent mechanical properties, Excellent water, and moisture resistance, good resistance to sun UV rays
Mixing ratio:
Component A: Component B = 100: 42 (by weight).
Application instructions
Careful surface preparation is important to achieve an excellent finish and great durability.
- Surfaces must be dry and free of dust and grease.
- You will need to use a high-accuracy weight scale to mix the ingredients. The ratio must be accurate. Resin A to Hardener B = 100: 42
- Stirring should be done with a spatula and not with a drill.
- Recommended working time 2 hours at a temperature of 23 ° C.
- If you apply the material in doses, each layer should be applied as soon as the previous one starts to coagulate to avoid the formation of lines or reduced transparency.
- If air bubbles are trapped, you can remove them with an air gun.
- If you are going to apply the material to a mold, spray it with silicone spray before injecting the material into it so that it does not stick. If the mold is made of silicone, you do not need to spray it.
- If you are going to apply the material to a construction surface, make sure that you have molded the object to be constructed so that the resin does not run.
- The initial maturation comes in 24 hours and the full maturation takes place in 7 days depending on the thickness of the layer and the ambient temperature. Leave the object with the wet glass in a place free of moisture and dust.
- After hardening, the imperfections of the application can be sanded with very fine sandpaper and polished.
Cleaning
Clean tools or any excess immediately after use with nitro solvent.
CAUTION: Close the containers tightly and do not change the lids.
APPLICATIONS
- Thousands of applications can be made with any idea and most materials. Tabletops, bowls, serving platters, stools, 3-D displays with leaves, flowers, shells, insects, pebble stones, mineral stones, souvenirs, jewelry, photographs, coins, decorative wood constructions, and much more.
- Floor constructions with decorative elements such as pebbles, coins, and many other items.
- LIQUID GLASS Is ideal for the protection and decoration of many surfaces such as wood, metal, stone, ceramics, porcelain, cardboard, etc.
- Use your imagination, the internet, and YouTube for ideas and application methods.
With EMERALD LIQUID GLASS you can create incredible artistic constructions for decoration and use.
Specifications
- Coverage: 1kg/m²/mm layer thickness
- Thinning: no
- Application: by spatula
- Touch dry: 12 - 24 hours 20°C
- Hard dry: 5 - 7 days 20°C
- Interior use
- Application temperature: 15°C - 35°C
- Cleaning: with nitro solvent
Suitable for professional use
EME10-42