Wooden Base PLY 3mm 40x60cm - Poplar

This is a high-quality Italian Poplar Plywood sheet which is suitable for a wide range of applications and is particularly suited to laser cutting. Poplar has a lower density than Birch, meaning that it can be easily laser cut at lower power settings

This Poplar Plywood has an AB grading which is typically the best grade of plywood available.

Please note:

As wood is a natural product, there is often a crook or bow to the sheet. The natural twist might be in excess of 25mm

The surface of the material will be consistent in appearance with no large variations in colour. Small pin knots are allowed and these would typically be only a few mm in diameter.

This plywood uses an EN314-2 Class 1 glue which is suitable for Interior (dry) conditions. Interior glue is generally considered the preferred option for materials that are to be laser cut. This is because the exterior glues can cause a more obvious 'burnt' look on and around the area that is cut.

Poplar is a cultivated wood that grows quickly, which makes it a very sustainable product. This material is PEFC certified.

Features:

• Low density for easier laser cutting.
• Top quality AB grading meaning fewer knots aiding consistency of laser cutting.
• PEFC Certified (Programme for the Endorsement of Forest Certification).
• Interior grade glue.

Contents:

• 1 x 3mm Poplar Laser Plywood, 600mm x 400mm Sheet.

Dimensions:

• Length: 600mm.
• Width: 400mm.
• Height: 3mm.

Reference Code: 3209