Wooden base PLY 1.5mm 30x40cm

This is a high quality 1.5mm Flexible Birch Plywood sheet produced in Finland which is suitable for a wide range of applications and is suitable for laser cutting. It is bendy and can be flexed to create curved designs.

This is BR 'veneer' grade Birch Plywood. This is similar to B grade material, with knots that would typically not exceed 7mm to 8mm in diameter. It shows the natural look of the wood and will show natural colour variations. These thinner plywoods are used in specialist applications and tend to have a slightly higher quality feel. The surface of the material is sanded to a smoother finish than that that of most plywoods.

This plywood uses an EN314-2 Class 1 glue which is suitable for interior (dry) conditions. Interior glue is generally considered the preferred option for materials that are to be laser cut. We use interior glues because exterior glues can cause a more obvious 'burnt' look on and around the area that is cut.

This material is PEFC certified.

Features:

• High quality material with a smoother surface than typical plywood.
• PEFC Certified (Programme for the Endorsement of Forest Certification).
• Interior grade glue.
• 3 ply plywood.

Contents:

• 1 x 1.5mm BR Grade Birch Laser Plywood, 400mm x 300mm Sheet.

Dimensions:

• Length: 400mm.
• Width: 300mm.
• Height: 1.5mm

Reference Code: 3277