English
Ελληνικά
Robot Smart Car 4WD multi-utility robot is a great way to get started into four motor robot chassis. This is one great product to get your feet wet in the world of robotics.
The economical robot platform has in itself a lot of versatility. It features Four gear motors with 65mm wheels. The chassis plates and mounts are cut from Black 3mm Acrylic and has holes for mounting Arduino, Sensors, Controllers and additional modules. Simply connect the two panels using included spacers and you’ll be able to attach everything in no time.
Robot can be constructed with motors either between the two plates or below the bottom plate for higher ground clearance. For line follower, we suggest higher ground clearance. For only obstacle avoidance, sandwich the motors between the plates.
- Laser Cut Acrylic Chassis to enhance creativity & innovation
- Four 125 RPM motors - Useful for any kind of robots
- High-Quality Wheels & Motors
- M3 holes Arduino Board, Raspberry Pi and additional sensors
- Battery holder, Brackets, screws and nuts included
NOTES
- The kit requires assembling and needs a screwdriver to set the screws and nuts together.
- The chassis may have a layer of paper on both sides. You may either choose to remove and assemble it, or leave it as is
- Motors do not have wires soldered. You may need a Soldering Iron, Solder lead to solder wires to motors
- Kit does not include batteries. Source 4 x AA batteries to get them rollin'
- Sensors and electronics are not included.
- Arduino or Raspberry Pi are not included.
THE PACKAGE INCLUDES
- 2x Chassis plates
- 4x Dual shaft gear motors
- 4x Encoded Disks
- 4x Plastic Wheels
- 4x Rubber Tires
- 8x Acrylic Motor brackets to hold two motors
- 8x Cables for motors
- 1x Battery holder with compartment for 4 AA Batteries
- Set of Screws, Nuts, Mounts to assemble the chassis
- Assembling instructions
- Voltage: DC3-6V
- Reduction Ratio 1:48
- Rotate Speed 125rpm/min
- Tire Diameter： About 66mm
- Tire Thickness： About 28mm
AD008
