English
Ελληνικά
Heavy Duty Wood Varnish 500ml - Polyvine
ART6020
New product
highly durable, fast-drying, fast 16-hour curing, crystal clear protection
An ultra-hard, high quality, fast-drying varnish with a satin finish that dries to a crystal clear film for interior surfaces requiring a high level of protection such as working surfaces and areas of high wear.
Specifications
- interior
- water resistant
- stain resistant
- abrasion resistant
- heat resistant
- chemical resistant
- ultra hard
- quick drying
- water wash-up
- 16-hour cure
- food and child safe
- Suitable for: doors • wooden worktops • tabletops • furniture • kitchen cabinets • wood panelling
- drying time: 30-60 minutes
- recoat time: 1-2 hours
- curing time: 16 hours
- coverage: 10-20 square metres per litre
Preparation
All surfaces must be clean and free from dust, dirt, oil and contamination. Remove oils/resins from oily hardwoods and resinous softwoods. Sand to a smooth finish and remove all dust.Application
Ensure the product is well mixed but do not shake. Use a good quality synthetic varnish brush and apply evenly using light brush strokes. Apply the first coat and allow it to dry. To prime porous surfaces dilute with 10% water. Apply one or two further coats.Caution
Always apply to a test area before starting work. Appearance may vary according to the colour and type of wood and the number of coats. Do not apply over uncured oil-based paint. When using dead flat finish, for a high level of protection and stain resistance apply 2 coats of satin then 1 coat of dead flat.Storage
Protect from extremes of temperature during storage and application.Health, safety and the environment
Non-hazardous. Ensure good ventilation.Keep out of reach of children.
Contact with eyes - wash immediately with warm water.
Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.
10260
| Quantity (ml) | 500ml |
